Movement Simulation and Floor Plan Deduction | Walk Through Your Day

• Method: Different family members walk their morning/dinner/night routes on the floor plan three times.

• Tool: Use different colored pens, mark key points (doors, refrigerator, switches).

• Output: A list of conflict points and suggested changes.

Movement Flow Key Points and Checklist (Integrated Version)

• Start with "High-Frequency Routes": Straighten and shorten the most frequently used paths—Kitchen ↔ Dining Room, Bedroom ↔ Bathroom, Garage ↔ Kitchen—to reduce detours and backtracking.

• Space Allocation: Reserve low-light areas for hallways and secondary functions. Allocate good light and full scale to high-frequency spaces like the living room. The study can be near the entrance for convenience and to act as a sound buffer.

• Privacy through "Natural Zoning," not afterthought doors: Use semi-screening at the living room entrance. Avoid the guest bathroom directly facing public areas. "Fold" the main bathroom as much as possible into a visual dead end.

• Kitchen Core: Center the layout around the closed loop of "Refrigerator → Washing/Prep → Stove." The island is a transfer station but should not become a circulation bottleneck. Place the trash and dishwasher close to the washing/prep area for smooth flow.

Checklist for Verification

• High-frequency routes are straightened: Kitchen ↔ Dining Room, Bedroom ↔ Bathroom, Garage ↔ Kitchen

• Functional kitchen work triangle: Refrigerator → Washing/Prep → Stove; island does not block flow

• Entryway offloading and flow separation: Mudroom/Landing area, semi-screening for privacy

• Quiet sleeping zone: Corridor centralized to the lower light side, good light reserved for living areas

• Bathroom proximity and concealment: No disturbance at night, guest bathroom set with a turn/bend

• Living/Dining room open yet unblocked: Direct path for serving food, sightlines not interrupted by passages

• Short laundry chain: Shortest path from changing clothes → washing → drying/airing → storage

• Direct backyard access: Circulation loop from Dining/Kitchen to backyard

• Safety first: Reduce sharp turns and level changes, use motion sensor lights at night

• Switches and lighting aligned with flow: Dual control switches and sensor lighting in hallways

• Localized storage: Entryway, dining cabinet, and hallway wall cabinet transfer storage

• Conflict points itemized: Solutions A/B for door-on-door clashes, obstructed openings, etc.

• Reserve buffer space: Planar "freeze points" and future equipment locations

Usage Method: Mark conflict points on the floor plan with colored pens. The review meeting will decide on each item according to the table, and the conclusions will be synchronized to the "Freeze Points."

Furthermore, have different family members review the conflict points, as everyone uses the home differently. 80% of exposed problems can be solved, 10% can be solved by increasing the budget, and the remaining 10% are relatively less important.

Below is an example of a living room layout change. The position of the bedroom was shifted to reserve the backyard sunlight for the living room.